Factory LC OM3/OM4 8/12/24f MPO/MTP fiber optic patch cord MPO
Product View
With the development of 5G, in order to meet the high density,high efficiency,high speed and large capacity optical cable network cabling system requirements, MPO/MTP products are being widely used in the application.
| Features - Cable diameter normal is 3.0mm round cable, we also have flat cable, 4.5mm double shealth cable, armoured cable, ect.
- MPO/MTP patch cord has A type, B type, and C type ( fiber arrangement).
- MTP/MPO connector type available in Male and Female.
- MPO Female connector is without PIN, MPO male connector with PIN.
- Fiber type available in single-mode (G652D, G657A1, G657A2), multi mode (OM3, OM4, OM5).
- MPO MTP connectors Insertion loss type: available in Standard, Elite / Low Loss.
- MPO/MTP connector types have 4/8/12/16/24/32/48 fiber.
| Applications Data Center Optical System Access network Storage area networking 40GbE & 100GbE protocol |
Specification
| Performance Level | Standard | Elite | | Connector | Mode | Endface | IL(max) (dB) | RL(min) (dB) | IL(max) (dB) | RL(min) (dB) | | MPO/MTP | MM OM4 | 8F/APC | ≤0.50 | ≥20 | ≤0.35 | ≥20 | | 12F/APC | ≤0.50 | ≥20 | ≤0.35 | ≥20 | | 24F/APC | ≤0.50 | ≥20 | ≤0.35 | ≥20 | | 8F/PC | ≤0.50 | ≥20 | ≤0.35 | ≥20 | | 12F/PC | ≤0.50 | ≥20 | ≤0.35 | ≥20 | | 24F/PC | ≤0.50 | ≥20 | ≤0.35 | ≥20 | | |
Order Information
| | Type | Mode | Fiber Count | Polarity | Grad | Connector A | Connector B | Polishing | Length | | PCMPO | 2=OS2 3=OM3 4=OM4 5=OM5 | 08=8 Fibers 12=12 Fibers 24=24 Fibers 36=3x12 Fibers 48=4x12 Fibers 96=8x12 Fibers 144=12x12 Fibers | A=Type A B=Type B C=Type C | S=Standard E=Elite | M=Male F=Female | M=Male F=Female | P=UPC A=APC | 01=1M 02=2M 05=5M 10=10M S=Specify | |
Application Diagram
1. Custom Fiber Count
2. Custom Polarity
To properly send data over fiber cable, a link’s transmit signal (Tx) at one end of the cable must match the corresponding receiver (Rx) at the other end. And the role of polarity, which defines the direction that the signal travels, is to make sure that this correspondence is maintained. Fiber polarity is one area that seems to cause a lot of confusion in our industry – especially when it comes to multifiber MPO solutions used in parallel optic applications.
MPO connectors also include a key on the top side of the connector and a white dot on the side to indicate the location of Position 1. The orientation of the key is critical when it comes to polarity.
There are also three different types of MPO cables – Type A, Type B and Type C as below pictures:
3. Custom Connectors
About us
Our Certificates
Packing
AFQ
Q1:Can I have a sample order? What is your MOQ?
A1:Sample order is welcome to test and check quality. We don't MOQ, 1pcs sample is available. Also Mixed samples are acceptable.
Q2: What's the Lead time?
A2: The normal lead time is about 1week, For big quantity and special products. Please check lead time with our sales representative. But we keep stock for some products, could ship 1-3 days after receiving payment.
Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,cash payment, Alibaba etc.
Q4: What is your warranty time
A4: 3 years' warranty.
Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your requirements, design products label, logo, PN, SN, package.
Product Tags:
|
|
12 / 24 Cores Patch Cable Series MTP MPO Cable OM3 OM4 OM5 3.0mm Images
|
